Product Info
Make wiring up your new light bar or driving lights simple thanks to the XTM Triple Input Plug’n’Play Wiring Harness! This wiring harness makes your new lights easy to install and can be used to operate both a pair of driving lights and a light bar at the same time. It comes with an on/off switch, 40A fuse 10AWG wiring from the relays to battery terminals and 40A relays for both 12V and 24V. Take the stress out of installing your new lights with the XTM Triple Input Plug’n’Play Wiring Harness.
Wiring Harness comes with the following:
- On/off switch
- 2 x 40A resistor protected relays (1 x 12V and 1 x 24V)
- 40A fuse with fuse holder
- 2.7m cable from relay to switch
- 3m cable from relay to light plug
- 2m cable from relay to headlight connector
- 1.05m cable from relay to inline fuse
- 0.3m cable from inline fuse to battery
- 1 x HB3 and 1 x HB4 headlight connector
- Red and black power terminals
